Mobile physical stocktaking can be done on any mobile device paired with a bluetooth barcode scanner, or with a USB barcode scanner plugged into a tablet or, less optimally, a laptop.
We recommend reading the physical stocktaking tutorial in conjunction with this tutorial to get a well rounded idea of this process.
Important: Do not create a physical stocktaking while sales are occurring.
The stock level of items in a Physical Stocktaking is generated at the time the document is created. The stock levels on this document do not update as items are sold. Selling items while taking stock will cause errors in the stock level count.
Step 1: Click on the INVENTORY module and click Physical Stocktaking – Mobile.
Step 2: Access the presented link on your mobile data scanner.
Step 3: Select the type of device you are using to do your physical stocktaking.
Step 4: When prompted, sign in with your Username, Password, and ERPLY Customer code.
Step 5: Click on New Stocktaking.
Step 6: Select the location for the stocktaking from the drop down menu and click on Continue.
Step 7: Test the sounds. Once tested, check the boxes and click continue.
Step 8: Check the box for Rapid scanning to scan each item without confirming each scan. By default the cursor will be in the Code field. You can begin scanning your inventory and each barcode will increase the count by 1. Without rapid scanning, you can scan a barcode then enter how many of that item you’d like to add to the count.
Note: The checkbox Default amount is 1 just indicates that each scan will document the quantity as being 1 for the specific product being scanned. If you are scanning unopened boxes of items, you can set this to the number of items in each package.
Step 9: Once you have finished scanning all the items, click Save.
Step 10: Return to the back office. Navigate to the INVENTORY module and select Physical Stocktakings.
Step 11: Open the recently saved stocktaking act that was created from your mobile device or data collector.
Step 12: Notice that the scanned quantities show in the Counted column. Review, and if anything is wrong, or counted by hand elsewhere, you can change those counts here.
For any products that you did not physically scan, you can scroll down to the very bottom of the inventory report and click on Enter default amount for the rest of the items, this will enter in the current stock amount in your ERPLY system.
If you click on Enter zeros for the rest of items. this will enter a “0” into the counted column for all products that were not scanned during your stocktaking act when you used the mobile device or data collector.
Either of these buttons will pop up a warning that this is not reversible. If you are sure this is how you want to handle your uncounted items, click ok.
Step 13: Click on Save and _Confirm _once done. Once saved, your Stocktaking act will display on list on main page of Stocktaking acts.
Note: AT THIS POINT YOUR STOCK LEVEL HAS NOT YET BEEN UPDATED
You will notice the following:
One or two new documents have been created :
Click on Receive Inventory. This will open up the inventory report window.
Step 14: Open the Write off Inventory and/or Receive Inventory links. Review the numbers and that the prices the items are being registered in with or written off with are correct.
Step 15: Review, then click Confirm. Once you confirm these documents, your inventory on hand for the counted location will be up to date and accurate in ERPLY.
Note: Registrations by default will populate with the price you last accepted that item in with, and Write-offs will write items off at the cost that those items came in with, according to FIFO rules.